INFICON STM-2 USB Thin Film Rate/Thickness Monitor - Manual (Page 35)

3 - 9
PN
07
4-
61
3-
P1
A
STM-2 Operating Manual
3.3.2.1.1 X Axis & Colors
Figure 3-7 X Axis & Colors tab
X Axis Width . . . . . . . . . . . . . . . . . . 1 minute to 120 minutes, 59 seconds
Use the spin box to enter the minutes and
seconds displayed as a maximum x-axis
value on all of the graphs.
X Text Interval. . . . . . . . . . . . . . . . . 1 to 480 seconds
Displays the time on the x-axis of all graphs
for the selected interval.
X Axis Scrolling . . . . . . . . . . . . . . . Select Step 5%, 25%, 50%, 75%, or 100%, to
determine the percentage of the graph that is
available for new data once the plot reaches
the maximum x-axis value.
Line Colors . . . . . . . . . . . . . . . . . . . Use the drop-down list box to select a color
to correspond with each STM-2 connected.
NOTE: This will also change the Line Color
on the STM-2 tab (see Figure 3-15
on page 3-19 ).
Click Apply to update the display with any changes made. Click OK to save
changes and exit the Configure Graph(s) window. Click Cancel to cancel any
changes and exit the Configure Graph(s) window.