INFICON STM-2 USB Thin Film Rate/Thickness Monitor - Manual (Page 64)

4 - 16
PN
07
4-
61
3-
P1
A
STM-2 Operating Manual
 Click the upper-left icon, then press and drag in the graph pane to select and
zoom in on a defined area
 Click the upper-middle icon, then press and drag in the graph pane to select
and zoom in on a defined x-range
 Click the upper-right icon, then press and drag in the graph pane to select and
zoom in on a defined y-range
 Click the lower-left icon to return to the previous graph
 Click the lower-middle icon, then click anywhere in the graph pane to zoom in
on a defined location on the graph
Click the hand icon ( ) and then press and drag in the graph pane to move the
graph.
4.3.6 Frequency Graph
Displays a graph of Frequency of the crystal used to monitor. Also displays a live
value in the Current Freq pane (see
Figure 4-16 ).
Figure 4-16 Frequency Graph tab
Right-click anywhere on the graph to Copy Data, Export Simplified Image,
Clear Chart, Auto Scale X, Auto Scale Y, or Update Mode.
Click the magnifying glass icon to zoom in or out of the graph (see Figure 4-17 ).
NOTE: Zoom in and out are not available if Auto Scale X or Auto Scale Y are
selected.