INFICON STM-2 USB Thin Film Rate/Thickness Monitor - Manual (Page 30)

3 - 4
PN
07
4-
61
3-
P1
A
STM-2 Operating Manual
3.3 STM-2 Window
The STM-2 window displays Serial Number (SN), (Sensor) Name, Rate,
Thick(ness) of the film, Zero thickness button, Freq(uency), crystal Life, Density of
the film, Z-Ratio, and Tooling for the connected sensor and process material. This
window also provides a button to Start, Stop, or Pause/Resume monitoring. Also,
the Run Time of the Process, the Run #, a selection for Data Log(ging) to be turned
on and off, and the current date and time are displayed. From this window, there is
also access to STM-2, Rate, Thickness, and Frequency tabs as well as the File,
Edit, and Help menus for customization and configuration (see
Figure 3-2 ).
Figure 3-2 STM-2 window
 File menu (see section 3.3.1 on page 3-6 )
 Edit menu (see section 3.3.2 on page 3-8 )
 Help menu (see section 3.3.3 on page 3-18 )
 STM-2 tab (see section 3.3.4 on page 3-19 )
 Rate tab (see section 3.3.5 on page 3-20 )
 Thickness tab (see section 3.3.6 on page 3-21 )
 Frequency tab (see section 3.3.7 on page 3-22 )