2 rate tab – INFICON STM-2 USB Thin Film Rate/Thickness Monitor User Manual
Page 36
3 - 10
PN
07
4-
61
3-
P1
A
STM-2 Operating Manual
3.3.2.1.2 Rate Tab
Figure 3-8 Rate tab
Y Axis Range pane
Min. . . . . . . . . . . . . . . . . . . . . . . . . . -100.00 to 100.00
Minimum y-axis value displayed on the Rate
graph.
NOTE: Minimum value must be less than the
value entered for the maximum.
Max. . . . . . . . . . . . . . . . . . . . . . . . . . -100.00 to 100.00
Maximum y-axis value displayed on the Rate
graph.
NOTE: Maximum value must be greater
than the value entered for the
minimum.
Axis Ticks pane
X Step . . . . . . . . . . . . . . . . . . . . . . . 0 to 100.0
Displays unlabeled x-axis ticks at the interval
selected.
NOTE: Ticks are only visible if Visible has
been selected. Clear to disable ticks.
Y Step . . . . . . . . . . . . . . . . . . . . . . . 0 to 100.0
Displays unlabeled y-axis ticks at the interval
selected.
NOTE: Ticks are only visible if Visible has
been selected. Clear to disable ticks.