INFICON XTC/3 Thin Film Deposition Controller Software Editor Operating Manual - Manual (Page 32)

2 - 8
IP
N 07
4-
45
2-
P1
A
XTC/3 Editor Operating Manual
Figure 2-9 System Properties: Port added
For Serial Communications (RS-232), the port properties can be changed by
selecting the serial port item (e.g. COM1), then clicking the Properties button on
the Port Settings page (See
Figure 2-9 ). Clicking the Properties button will
display the Com Properties page with three tabs shown in Figure 2-10 and
described in section 2.2.2 .