INFICON XTC/3 Thin Film Deposition Controller Software Editor Operating Manual - Manual (Page 62)

3 - 20
IP
N 07
4-
45
2-
P1
A
XTC/3 Editor Operating Manual
The content of an individual process can be sent to the controller. Select a process,
right click to bring up the context menu, select Send Process. See
Figure 3-29 .
Please note that an empty process can be sent to clear a process in the controller.
Figure 3-29 Sending a Process to the Controller
A process can be filled or replaced with the content of a process from the controller
via Query Process. Select a process, right click to bring up the context menu, select
Query Process. See
Figure 3-30 .
Figure 3-30 Querying a Process in the Controller