Figure 3-19 – INFICON XTC/3 Thin Film Deposition Controller Software Editor Operating Manual User Manual
Page 57
Advertising
3 - 15
IP
N 07
4-
45
2-
P1
A
XTC/3 Editor Operating Manual
Figure 3-19 Adding Layers
If there are already layers, add new layers at a certain position by selecting the
position and clicking the >> button. For example, as shown in
and
, Films 12 and 15 are inserted above Film 5, position 4.
Figure 3-20 Adding Layers To a Specific Positon
Advertising