INFICON XTC/3 Thin Film Deposition Controller Software Editor Operating Manual User Manual
Page 58
Advertising
3 - 16
IP
N 07
4-
45
2-
P1
A
XTC/3 Editor Operating Manual
Figure 3-21 Result
A layer (on the right side) can be moved up or down by first selecting it and either
dragging it up or down with the mouse or by clicking the up or down arrow in the
toolbar located above the Layers side. In the example shown in
, Film
11 is moved up to the positon above Film 4. The result is shown in
.
Figure 3-22 Moving layers up or down
Advertising