3 the pause and start/stop controls, Figure 4-9, That – INFICON XTC/3 Thin Film Deposition Controller Software Editor Operating Manual User Manual
Page 68: Figure 4-10
4 - 6
IP
N 07
4-
45
2-
P1
A
XTC/3 Editor Operating Manual
Figure 4-9 Set Mark Dialog
Figure 4-10 Mark Indicator on Graph
4.2.4.3 The Pause and Start/Stop Controls
The Pause Screen button (see
Figure 4-11
) on the Control Panel stops the
plotting of data collected, which allows the plotted data to be easily studied or
reviewed. Pause freezes the display but not the data collection. Data collection
continues in the background while the display is frozen and the Pause Screen
button is colored yellow. Pressing the yellow Pause Screen button will unfreeze
the display and update the graph with all the data collected since the button was
pressed. There is an equivalent Pause button on the toolbar (see
Figure 4-11
).
Moving the Data Cursor will also Pause the display during data collection.
NOTE: Changing the X-axis to 60 minutes or greater, when the Trend Graph is
scrolling, will automatically freeze the display.