INFICON BPG402-Sx ATM to Ultra-High Vacuum Gauge User Manual
Page 23
tina46e1-a (2010-03) BPG402.om
23
Plug the Profibus (and sensor) cable connector into the gauge.
Sensor cable
Profibus cable
Lock the Profibus cable (and sensor cable) connector.
The optional 24 VDC power supply (
→ 45) allows RS232C operation of the
BPG402-Sx gauge with any suitable instrument or control device.
The instrument or control device needs to be equipped with a software that sup-
ports the RS232C protocol of the gauge (
→ 30).
Mains connection
Mains voltage
90 … 250 VAC, 50 … 60 Hz
Mains cable
1.8 meter (Schuko DIN and U.S. con-
nectors)
Output (operating voltage of gauge)
Voltage
21 … 27 VDC, set to 24 VDC
Current
Max. 1.5 A
Gauge connection
Connector
D-Sub, 15 pins, female
24 VDC cable
5 m, black
Connection of the instrument or
control device
RS232C connection
D-Sub, 9 pins, female
Cable
5 m, black, 3 conductors, shielded
RS232C
D-Sub, 9 pins
Mains
90 ... 250 VAC
50 ... 60 Hz
13
14
8
15
5
2
3
5
4
6
7
8
N
PE
L
DC
AC
GND
+24 V
PE
BPG402-Sx
D-Sub,
15 pins
3.2.3 Using the Optional
Power Supply
(With RS232C Line)
Technical data
Wiring diagram