Leica Biosystems TP1020 - Manual (Page 12)

12 Instructions for Use V 2.9 RevC, English – 12/2013
Wax baths
Maintenance
Activated carbon filter (optional accessory)
2. Safety
• Only authorized and qualified service personnel may access the internal components of the
instrument for service and repair!
• Before replacing the fuses, turn off the power switch and unplug the instrument!
• Burnt-out fuses may only be replaced by fuses of the same type and specification. For appro-
priate brands and specifications, see Chapter 3 "Technical Data".
• If the excess temperature repeatedly - please call Leica Technical Service. DO NOT continue
to use the wax bath.
• Check if the wax bath works trouble-free. Use of defective wax baths has to be discontinued
for safety reasons!
• Empty the wax baths completely before the paraffin cools! When cooling down, the paraffin
contracts, which can cause damage to the wax bath.
• Warning! Fire hazard! If a filter becomes saturated with solvent, there is a potential fire risk!
It is important that the activated carbon filters are changed at factory recommended inter-
vals.