Leica Biosystems TP1020 - Manual (Page 58)

58 Instructions for Use V 2.9 RevC, English – 12/2013
9. Operating the Instrument in the Automatic Processing Mode
• To start the selected program immediately,
press START again.
Immediate start (continued)
• To override the warning codes and start pro-
cessing, press KEY and START simultaneously.
After the drain time of 60 seconds, the carousel
will automatically move to the programmed start-
ing position.
While the basket is being moved, the display
reads the numbers of the container stations the
carousel is rotating past. Instead of the infiltra-
tion time "h" will be displayed.
As soon as the basket has arrived at the pro-
grammed starting station, it will be lowered into
that station.
+
The warning codes W:04 - W:06 (see
Chapter 13) are displayed for programs
of less than 8 hours duration from start
until the basket reaches the first wax
bath. Check if the available amount
of time is sufficient for the paraffin to
liquefy completely. If this is not ensured,
fill the wax baths with liquid paraffin.