Leica Biosystems TP1020 - Manual (Page 64)

64 Instructions for Use V 2.9 RevC, English – 12/2013
9. Operating the Instrument in the Automatic Processing Mode
In the example shown here end of processing
would be the next day at 10.38 AM.
• To quit the display indication, press CLOCK
again.
9.4 Pausing a process
Automatic specimen processing can be inter-
rupted and resumed later, for example to reload
specimens.
• To interrupt the program, press the PAUSE/
CONT button.
"PAUSE" is displayed.
When in "PAUSE", the buttons for manual opera-
tion become functional, e.g. to lift the tissue bas-
ket out of a station to add specimens. The car-
ousel can also be rotated to move the basket to
any processing station - see chapter 8 "Operating
the Instrument in the Manual Processing Mode".
Editing and modifying programs while a processing cycle is in progress (continued)
While a run is paused, "PAUSE" will be displayed continuously. In addition, 5 minutes after last
pressing a button, a double sound signal will remind the user that processing is still paused.
The sound signal will recur in 5 minute intervals until processing is resumed.