Leica Biosystems TP1020 - Manual (Page 66)

66 Instructions for Use V 2.9 RevC, English – 12/2013
Stopping or terminating a process (continued)
9. Operating the Instrument in the Automatic Processing Mode
If there is an emergency, an automatic process-
ing cycle can be stopped immediately and - in a
subsequent step - entirely aborted.
Processing will continue as programmed.
• To abort the process, press STOP again.
This will terminate the specimen processing defi-
nitely without any option to resume processing.
The tissue basket remains immersed in the cur-
rent station and has to be removed in the manual
processing mode.
The termination of automatic specimen process-
ing is indicated on the display, supported by
an audible signal that is repeated in 30-second
intervals.
The position of the specimen basket and "DONE"
appear in the display.
• Press any key to confirm the message and turn
off the sound signal.
The specimens can now be removed in the
manual processing mode.
9.7 End of an automatic process