Leica Biosystems TP1020 - Manual (Page 59)

59 Leica TP1020
9. Operating the Instrument in the Automatic Processing Mode
From that point on, the remaining infiltration time
of the basket in the current station is displayed.
While processing time is running, the display
reading is updated in one-minute intervals; i.e.
you can always see exactly the remaining infil-
tration time for each station.
Select starting time
• Press START.
The program which was used last is displayed.
Decide whether you want to start that particular
program or select another one.
• To enter the desired starting time, press
ARROW RIGHT.
The display reads START and the cursor blinks
at the data entry position for the days of delay:
0 = Start at the same day (= today),
1 = Start the next day (= tomorrow),
2 = Start in two days (= the day after tomorrow),
etc.
Immediate start (continued)
9.1.2 Delayed start
The delay function enables you to start
a program e.g. during the weekend, so it
will be completed by the time you return
to work on Monday.