Safety – Leica Biosystems ASP300 S User Manual

Page 12

Advertising
background image

13

Instructions for Use, V 1.5 RevD – 03/2013

Warnings – Handling reagents

2. Safety

Warnings – Cleaning and maintenance

Take care when handling solvents!

Always wear rubber gloves and safety goggles when handling the chemicals used in this

instrument.

Reagents used for tissue infiltration can be both toxic and/or flammable.

To prevent damage to the instrument, use only the reagents listed in

Chap. 3.5

!

Do not use acetone, benzene or trichlorethane!

Use caution when handling paraffin wax or removing baskets – molten paraffin is hot and may

cause burns.

Also, avoid personal contact with paraffin reservoirs and retort walls – they can be very hot as

well.

When disposing of spent reagents, observe the applicable local regulations and the waste

disposal regulations of the company/institution in which the instrument is being operated.

Do not clean reagent containers (bottles) in a dishwasher; the containers are NOT dishwasher-

proof.

Switch off the instrument each time before servicing and pull out the power plug.

Do not clean the instrument with solvents containing acetone or xylene. No liquid may be

spilled into the internal components of the instrument – neither during operation nor during

cleaning.

When using cleaners, please comply with the safety instructions of the manufacturer and the

laboratory safety regulations.

Check the condensate container at least once a week and, if necessary, drain it.

2.2 Warnings

(continued)

Advertising