Leica Biosystems ASP300 S - Manual (Page 35)

36 Leica ASP300 S
4.10 Switching off the instrument
If the instrument must be completely switched off or disconnected from the
power supply, please proceed as follows:
• Press MENU to switch to the MENU FUNCTIONS window.
• Press the EXIT APPLICATION button there.
A message appears stating that all data has been stored and the system is
being shut down.
Once all data has been stored, the following message appears:
You can now switch off the instrument with the ON/STOP switch on the
right of the instrument and with the ON/OFF switch on the rear panel of the
instrument ( item 42 in Fig. 4 ).
Pressing the RESTART key restarts the instrument.
Fig. 20
Fig. 19
4. Initial Operation
Notice!
The ASP300 S is allowed to be switched off completely in this way
only. Otherwise, severe damage to the instrument's hardware and
loss of data can occur.