2 access levels, Operation – Leica Biosystems ASP300 S User Manual

Page 39

Advertising
background image

40

Leica ASP300 S

SECURITY

Access rights to the instrument are managed here as

user profiles.

SUPERVISOR MODE: Enabled or Disabled

Enabled - There are two different user profiles.

A password is required for supervisor level access to the

in- strument. Enabling SUPERVISOR MODE already requires

entering the password.

5.1.2 Access levels

The Leica ASP300 S may be configured to allow two levels of user access.

Operator access level:
• Operators may run programs and view results. On this level, the OPERATOR

symbol is displayed in the upper right corner of the touchscreen; all enabled

buttons are surrounded by a black border.

Supervisor access level:
• Supervisors may perform all Operator functions, and additionally create

programs and perform the initial operation functions.

In supervisor mode, the SMART SCREEN menu displays a status bar with

information about the retort and the wax baths (see

Fig. 53

)

• To access Supervisor level, press SUPERVISOR,enter the required pass-

word and confirm. After you enter the password, the SUPERVISOR sym-

bol appears in place of OPERATOR, the outlining of all active buttons

changes from black to blue, the SUPERVISOR button is replaced by the

OPERATOR button.

"Operator" symbol

"Supervisor" symbol

→

Disabled -

Default state of the instrument. All instrument and software

functions of the ASP300 S are fully accessible to all staff.

Fig. 29

5. Operation

Supervisor mode is disabled in factory condition.

Advertising