Leica Biosystems RM2265 - Manual (Page 25)

23 Leica RM2265
5. Operation
Three-digit display
for section thickness/
trimming section
thickness.
Green LED
Lights up when trim-
ming mode is active.
Green LED
Lights up when section-
ing mode is activated
5.1.2 Control panel
Green LEDs
For displaying the ac-
tive operating mode
Rotary knob
For setting the section-
ing speed
Buttons
RUN STOP and ENABLE
start and stop motorized
sectioning.
Buttons
for setting the sec-
tion thickness/
trimming section
thickness
TRIM/SECT button
For switching between
sectioning mode and
trimming mode
CUT MODE button -
selection of operating
mode
Button
Set sectioning window
Yellow LED -
Flashes during coarse
feed backwards; lights
up when rear end posi-
tion is reached.
Yellow LED -
Flashes during coarse
feed forwards; lights up
when front end position
is reached.
Forward
fast coarse
feed
Backward
slow coarse
feed
Backward
fast coarse
feed
Multiple
step back-
ward
Multiple
step for-
wards
Single
step back-
ward
Forward
slow coarse
feed
Single
step for-
wards
Trimming mode:
Sectioning mode:
Yellow LED
Illuminated if the motor
is switched on.
Green LED
Illuminated if the mo-
tor is switched off or
stops at the next stop
position.
Fig. 15
Coarse feed buttons
Green LED
Flashes until second
sectioning window
edge is set