Leica Biosystems RM2255 - Manual (Page 8)

6 Instructions for Use, V 1.8 RevC – 07/2013
2. Safety
2.1 Safety notes
These Instructions for Use include important
information related to the operating safety and
maintenance of the instrument.
The Instructions for Use are an important part of
the product, and must be read carefully prior to
startup and use and must always be kept near
the instrument.
This instrument has been built and tested in ac-
cordance with the safety regulations for electri-
cal measuring, control, regulating and laboratory
devices.
To maintain this condition and ensure safe
operation, the user must observe all notes and
warnings contained in these Instructions for Use.
For current information about applicable stan-
dards, please refer to the CE declaration of con-
formity on our Internet site:
www.LeicaBiosystems.com
2.2 Warnings
The safety devices installed in this instrument by the manufacturer only constitute the basis
for accident prevention. Operating the instrument safely is, above all, the responsibility of the
owner, as well as the designated personnel who operate, service or clean the instrument.
To ensure trouble-free operation of the instrument, make sure to comply with the following
instructions and warnings.
The safety and caution notes in this chapter must be observed at all times.
Be sure to read these notes even if you are already familiar with the operation and use of other
Leica products.
These Instructions for Use must be ap-
propriately supplemented as required
by the existing regulations on accident
prevention and environmental safety in
the operator‘s country.
The protective devices located on the instrument and the accessories must not be removed or
modified. Only service personnel qualified by Leica may repair the instrument and access the
instrument's internal components.