Lenze 9228E - Manual (Page 62)

60

5.3. Table of attributes
If you want to programme the parameter setting or superimposed
drive and control functions yourself, the following table will inform
you about serial communication via LECOM1 (LECOM A/B) or
LECOM2.
Legend
Code Meaning
Code Lenze code number
DS Data structure
E = Single variable (only one parameter element)
A = Array variable (several parameter elements can be selected by
the code for the preselection or by LECOM sub code.)
I = Image variable (several parameter elements can only be
selected by the code for preselection).
P/S Parameter setting/control (corresponding to C001)
P = Parameter setting
S = Control
DT Data type
B8
= 1 byte bit coded
B16 = 2 byte bit coded
VS = ASCII string
FIX32 = 32-bit-value with sign;
decimal with four decimal places
Examples:
1.2 = 12000FIX32-dez 00002EEOFIX32-hex
-10.45 = -104500FIX32-dez FFFE67CCFIX32-hex
N16 = 16-bit value with sign; 0 = 0; 100% = 214
100% = 16384N16-dez
4000N16-hex
-50% = -8192N16-dez E000N16-hex
DL Data length in byte
LCM-R/W Access authorization for LECOM
Ra
= Reading always permitted
W = Writing permitted under certain conditions
(e.g. operating mode, controller inhibit)
Wa = Writing is always permitted
LCM1-
Form. LECOM A/B-format
(see technical description LECOM A/B)
AIF-PZD Process data in the automation interface.
Mapping on LECOM2 process data channel is possible.
PD = Process data
LCM2-
Index Number (index) under which the parameter is addressed when using
LECOM 2.