Planning and installation, Features – Lenze 9228E User Manual
Page 7
5
Planning and installation
1.
Features
The 9200 controller series comprises 3 supply modules (types
9212, 9215 and 9217) and 7 servo modules (types 9222-9228 with
motor peak currents ranging from 8 to 82 A) for asynchronous
servo motors.
•
Digital control by 16-bit microcontroller and 3 ASICs
•
Field-orientated vector controlled current
•
Four-quadrant operation, any speed and torque direction
•
Inverter with IGBTs
•
Selectable chopper frequency either low noise 8kHz or silent
16kHz
•
Supply and axis modules can be combined for single or multi-
axis operation
•
Efficient energy exchange by means of DC-bus for multi-axis
operation
•
Controlled operation even during mains interruption.
•
Supply modules with integrated brake chopper and brake
resistors
•
Short-circuit protected inverter outputs
•
When using the specified mains chokes, the units comply with
the overvoltage class 2 according to VDE 0160
•
I x t monitoring as overload protection for the inverter
•
Parameter setting and diagnosis via keypad and 2-line LCD
display in plain text German, English, and French language
•
Control parameters can be modified ON-LINE
•
Isolated digital inputs and outputs for 24V-PLC level
•
Electronic incremental encoder simulation for use by other
drives
•
Master frequency input for positioning, master/slave operation
or angular synchronization
•
Drift free standstill in the case of master frequency input or
quick stop QSP
•
Serial interface LECOM A/B (RS232 and RS 485) for
parameter setting, control and diagnosis
•
Enclosure IP20
•
Variants with additional modules are available
•
Approvals: UL 508, File no. 132659
VDE 0160, VDE reg. no. 1799