Lenze E94AxHE Technology Application CiA402 Device profile - Manual (Page 187)

EDS94TA11010xxxx EN 1.2 - 03/2010
L
187
9400 Technology applications | CiA402 device profile
Step-by-step commissioning
Create new Engineer project
4.1 Create new Engineer project
Commissioning is carried out with the »Engineer« by selecting the application from the
catalogue, transmission to the controller, and parameter setting via corresponding dialogs.
1. Start »Engineer«.
2. Go to Start-up wizard and select the option "New project (empty)" and enter a name for
the project in a next step.
3. Insert axis for the 9400 HighLine controller.
– Add the corresponding components to the axis (9400 HighLine controller, motor,
safety module, memory module).
– Select the "CiA402 device profile" application for the controller.
– Example project view in the »Engineer«:
Next step
 Set machine parameters
( 188)