MTS Acumen - Manual (Page 194)

Routine Maintenance Overview Checklist
Important:
There are no customer-serviceable components on the MTS Acumen frames. Maintenance consists
of keeping the frame and work area clean, general inspection, checking interlocks, and scheduled
frame calibration.
Recommended Service
Annually Monthly Daily Calendar Time Using 8 Hours Running
Time Rate per Day
2000 160 8 Running Time-Hours
X Clean work area / machine surfaces.
X Check frame-mounted control Emergency
Stop.
X Check remote Emergency Stop (if
present).
X Check test area enclosure—open door
applies low velocity.
Load Frame / Crosshead
MTS Check crosshead locks for proper
operation.
MTS Check crosshead lift belt for wear.
MTS Check / adjust crosshead lift belt tension.
MTS Check / clean crosshead lift screws.
MTS Check / clean columns.
MTS Assure crosshead movement is smooth.
Actuator
MTS Check that cooling system is operational.
194 | MTS Acumen ™
Maintenance