MTS Acumen - Manual (Page 56)

Description Name Item
Select the units of measurement shown on the slider control. Display Unit 2
Indicates the minimum and maximum range allowed on the
slider according to the units of measurement in Display
Unit. Range Minimum,
Range Maximum 3
Enter the minimum range for the slider control. Range Minimum 4
Enter the maximum range for the slider control. Range Maximum 5
The smallest increment used in the slider range and the
distance it will move when you click the slider arrows. Resolution 6
Program Control Panel
Use the Program Control panel to start, pause, and stop a test run.
Program Control Panel
Description Control
Run — Start a test, resume a test that is held, or restart a test procedure that
is stopped. When the test is in the Run state, the button illuminates, and the
background is black.
Hold — Pause the test at the end of the current cycle or at the end of the current
non-cycle command activity. Click Run to resume the test run. You cannot
unload a test run that is held. When the test is in the Hold state, the button
illuminates, and the background is black.
Stop — Stop the test in place. The current cycle or command activity is not
completed. Click Run to restart the test. You can unload a test that is stopped.
When the test is stopped, the button illuminates and the background is black.
Test Run Status Panel
The Test Run Status panel provides a Stop Procedure button and information about which test run is being
processed, its status, and running time.
56 | MTS Acumen ™
System Introduction