MTS Acumen - Manual (Page 47)

Description Item Number
generation date, and time. Right-click within the Application Log
tab to open the existing log file, add a custom note to the log,
clear all messages from the log, or export the contents to a
Microsoft Excel file. Messages persist from one session to another.
Quick Access Toolbar
Use the Quick Access toolbar to open new tests, initiate test runs, set application preferences, adjust
display settings, and perform other general MPE or MPX actions. See the following for a list of the key
actions you can perform from the Quick Access toolbar.
Quick Access Toolbar
Description Icon
Click to start a new test run.
Click to open an existing test. The Open Test window opens where you can select a
recent test, a test from a Project folder, or a test from another location on your computer.
Click the arrow to select New Test from Template, New Test from Existing Test, or
New Test from File (which opens the C:\MTS TestSuite\External Files directory).
Click to save changes to the current test.
Click to save the current test as a template. You must have the Save Test as Template
privilege to execute this function. If you require this function, talk to your administrator
to modify your user role.
Control Panels
System Panel
The System panel provides status indicators for system power, crosshead locks, enclosure door, system
temperature, and controls for resetting and overriding an interlock. When the power to the frame is off,
actuator power is also off and power buttons are disabled. When a fault status indicator is triggered, the
Interlock/Override button is enabled, and other panel buttons are disabled until the interlock is reset.
MTS Acumen ™ | 47
System Introduction