MTS Acumen - Manual (Page 196)

Annually Monthly Daily Calendar Time Using 8 Hours Running
Time Rate per Day
MTS Check frame mounted control—high
power prohibit functions.
MTS Verify that unlocked crosshead generates
an interlock.
MTS Check system cable bundle connectors.
MTS Check system cable bundle for abrasions.
MTS Check supplemental ground attached.
MTS Verify tuning parameters are correct for
stable control modes.
MTS Verify load frame protection limits are
correct and enabled.
Warning :
Be careful not to spill cleaning liquid on the frame.
Cleaning solution can cause damage or injury.
To avoid hazardous conditions, always follow the manufacturers’ recommendations and
cautions.
General Cleaning
Clean the frame as often as needed. Use a damp, lint-free rag to clean the side covers, base, and crosshead.
If necessary, mild detergent or cleaning fluid can be used.
Monthly Maintenance
Verify that the Emergency Stop button is functioning properly.
Verify that any additional interlocks are functioning properly (for example, the interlock switches on the
door of a test area enclosure).
196 | MTS Acumen ™
Maintenance