MacDon Transport 25 ft 972 - Manual (Page 13)

SET-UP INSTRUCTIONS
Form # 131126 Issue 11/07 11
FRONT (CUTTERBAR) WHEEL (continued)
4. Install front wheel assembly as shown below.
• Install wheel assembly over guard tips (E) at right header leg.
• Ensure clamp is seated up inside leg.
• Operate lever (F) to engage clamp on leg plate.
• If leg mounted skid shoes are required, install new shoe (G) (with higher front lip) from kit at right
header leg.
NOTE: Leg mounted skid shoes can not be installed when combine adapter is installed.
FRONT WHEEL ASSEMBLY