MacDon Transport 25 ft 972 - Manual (Page 32)

CONVERTING TO FIELD
Form # 131126 Issue 11/07 30
CONVERTING FROM TRANSPORT POSITION TO FIELD
1. On a level area, stop tractor and engage park
brake.
2. Remove pins (G) at weight box links, both
sides.
3. Move header lift cylinder stops to storage
position (H).
4. Remove split ring and detach hitch pin at (A).
5. Disconnect wiring harness at (B) and store
header harness by engaging clip on 4-way
connector in hole on back panel of left
endsheet.
REMOVE WEIGHT BOX PINS
G
H
STORE HEADER LIFT CYLINDER STOPS
A
DETACH HITCH & HARNESS
B
STORE HEADER HARNESS