MacDon Transport 25 ft 972 - Manual (Page 17)

SET-UP INSTRUCTIONS
Form # 131126 Issue 11/07 15
TRANSPORT LIGHTS ON HEADER (continued)
9. At left end, route harness (G) as shown and
engage tab of 4-way connector in hole in
endsheet at (H) for storage. Ensure harness
will reach to hitch section before securing.
10. Secure harness at clamp (J) and cable tie at
(K) as shown. Attach harness ground wire at
bolt for clamp (J) with 3/8 nut provided.
CONNECTIONS TO LIGHTS
HEADER HARNESS – LEFT END
DOUBLE SICKLE
G
H
K
J
HEADER HARNESS – LEFT END
SINGLE SICKLE
H
G
K