MacDon Transport 25 ft 972 - Manual (Page 31)

CONVERTING TO TRANSPORT
Form # 131126 Issue 11/07 29
28. Back the tractor close to the left end of the
header.
29. Remove lock pin on tow hitch and swing hitch
out from storage position toward header. Attach
hitch to left transport wheel support at (A) and
secure with split ring.
30. Connect electrical harness from hitch to header
at (B).
31. Drive tractor ahead until hitch falls straight.
32. Install lock pin under hitch knee joint at (C) and
secure with split ring.
33. Do a walk-around check on the following items:
‰ Front wheel lock engaged.
‰ Warning lights on tractor and header are
clean and working.
‰ Outer wheels latched correctly.
‰ SMV sign, and reflectors on reel, header
tube and endsheets are clean and visible.
‰ Hitch pin installed and locked with split ring.
‰ Hitch knee joint pin installed and locked with
split ring.
‰ Weight box pins installed and locked with
lynch pins.
‰ Header lift cylinder stops engaged.
A
ATTACH HITCH & CONNECT HARNESS
B
C
LOCK HITCH JOINT WITH PIN