MacDon Transport 25 ft 972 - Manual (Page 34)

CONVERTING TO FIELD
Form # 131126 Issue 11/07 32
CONNECT SUPPORT CHAIN TO TRACTOR
C
B
REMOVE SUPPORT CHAIN FROM BRACKET
D
B
16. Lower header until cutterbar is approximately 4
inches (100 mm) from ground.
17. Move conditioner support chain (B) (the chain
attached to conditioner R/H shoe) from support
(D) on header leg to pin (C) inside of tractor leg.
18. Raise header fully.
DANGER: To avoid bodily injury or
death from unexpected start-up or fall
of raised header, stop engine, remove
key and engage header lift cylinder
stops before going under header for any
reason.
19. Remove transfer chain (A) from top of
conditioner and store at (E).
20. Connect conditioner float spring chain (F) on
left side of conditioner.
DETACH AND STORE TRANSFER CHAIN
A
E
CONNECT FLOAT SPRING
F