MacDon Transport 25 ft 972 - Manual (Page 24)

SET-UP INSTRUCTIONS
Form # 131126 Issue 11/07 22
WEIGHT BOX WHEELS & HITCH (OPTION)
For units with the optional wheels and hitch package for the front end weight box:
1. Slide strap (A) into V-channel inside box (accessible from the bottom) and bolt hitch to weight box as
shown, using two 5/8 x 1-1/4 hex head bolts (A) and lockwashers (C). NOTE: Welded nuts on strap
(A) go to the inside.
2. Install two 5/8 x 1-1-4 carriage head bolts (B) and secure with 5/8 flange lock nuts (D) as shown.
3. Slide wheel axles into tubes in weight box and tighten 1/2 x 2 hex head bolts (E) through welded nuts
and into axles to secure the assemblies.