MacDon Transport 25 ft 972 User Manual
Page 9
Advertising
SET-UP INSTRUCTIONS
Form # 131126
Issue 11/07
7
RIGHT END (REAR) WHEEL
1. On bottom flange of right endsheet, drill two 0.656” holes* (C) as shown.
NOTE: Holes in bottom flange may be round or square.
* These holes will be present on headers built in Model Year 2001 and later.
38 mm = 1.50”
100 mm = 3.94”
80 mm = 3.15”
RIGHT ENDSHEET HOLES
Advertising
This manual is related to the following products: