Rockwell Automation 20-COMM-H RS485 HVAC Adapter FRN 2.xxx User Manual

Page 77

Advertising
background image

Troubleshooting

8-5

20-COMM-H RS-485 HVAC Adapter User Manual

Publication 20COMM-UM009D-EN-P

15

Datalink A1 Out

The present value of respective Datalink Out being received from the
drive by this adapter. (If the drive indicates a 16-bit datalink size, the
value appears in the least significant 16 bits of this diagnostic item, and
the most significant 16 bits of this diagnostic item are zero. Refer to

Chapter 7

,

Using Datalinks with All Protocols

for information about

Datalinks.)

16

Datalink A2 Out

17

Datalink B1 Out

18

Datalink B2 Out

19

Datalink C1 Out

20

Datalink C2 Out

21

Datalink D1 Out

22

Datalink D2 Out

23

Field Flash Cntr

The number of times this device has been flash updated.

24

DPI Rx Errors

The present value of the DPI CAN Receive error counter.

25

DPI Tx Errors

The present value of the DPI CAN Transmit error counter.

26

Net Packet Sent

Number of packets sent by the adapter.

27

Net Packet Rcvd

Number of OK packets received by the adapter.

28

Net Bad Packet

Number of BAD packets received by the adapter.

29

User IN 1

Current value of configurable point User IN 1 (RTU / N2 / P1 FLN).

30

User IN 2

Current value of configurable point User IN 2 (RTU / N2).

31

User IN 3

Current value of configurable point User IN 3 (RTU / N2).

32

User IN 4

Current value of configurable point User IN 4 (RTU / N2).

33

User IN 5

Current value of configurable point User IN 5 (RTU).

34

User IN 6

Current value of configurable point User IN 6 (RTU).

35

User IN 7

Current value of configurable point User IN 7 (RTU).

36

User IN 8

Current value of configurable point User IN 8 (RTU).

37

User OUT 1

Current value of configurable point User OUT 1 (RTU / N2 / P1 FLN).

38

User OUT 2

Current value of configurable point User OUT 2 (RTU / N2).

39

User OUT 3

Current value of configurable point User OUT 3 (RTU).

40

Switch 1

Current value of Rotary Switch 1 (Protocol Select) which can be “1” =
RTU, “0” = N2, or “9” = P1.

41

Switch 2

Current value of Rotary Switch 2 (Node Address ones digit).

42

Switch 3

Current value of Rotary Switch 3 (Node Address tens digit).

Table 8.A Adapter Diagnostic Items (Continued)

No. Name

Description

Advertising