Module positions, Rotary switches, Devicenet connection – Rockwell Automation 855T DeviceNet Stack Light User Manual User Manual
Page 11
Advertising
![background image](/manuals/577458/11/background.png)
Overview of DeviceNet Stack Light 1-3
Publication 855T-UM001C-EN-P May 2005
Module Positions
Figure 1.2
Rotary Switches
The DeviceNet Stack Light has three 10-position rotary switches for setting:
• DeviceNet Data Rate
• DeviceNet Node Address
The rotary switches are located on the circuit board on the top of the base. The switch
settings and functions are shown below.
Figure 1.3
DeviceNet Connection
The DeviceNet Stack Light receives all power and communications through the DeviceNet
Cable. A separate power supply is not required. This is the only external connection to the
DeviceNet Stack Light.
1
2
3
4
5
Data Rate
Node Address
MSB
LSB
Advertising