Save the program to on-board nvs memory – Rockwell Automation 1756-L7x GuardLogix 5570 Controllers User Manual

Page 112

Advertising
background image

112

Rockwell Automation Publication 1756-UM022A-EN-P - November 2012

Chapter 8

Store and Load Projects Using Nonvolatile Memory

Clear the program from the controller’s on-board NVS memory. For more

information, see

Clear the Program from On-board NVS Memory

The following table describes the ESMs.

Save the Program to On-board NVS Memory

Follow these steps to save the program to NVS memory when the controller loses
power.

1. Remove power from the controller.

You can remove power in either of two ways:
Turn power off to the chassis while the controller is installed in the

chassis.

Remove the controller from a powered chassis.

Immediately after the controller is no longer powered, the OK status
indicator transitions to solid red and remains that way long enough to save
the program.

Figure 29 - OK Status Indicator.

Table 36 - Energy Storage Modules

Cat. No.

Description

1756-ESMCAP(XT)

Capacitor-based ESM
The controllers come with this ESM installed.

1756-ESMNSE(XT)

Capacitor-based ESM without WallClockTime backup power
Use this ESM if your application requires that the installed ESM deplete its residual stored
energy to 40

μ

J or less before transporting it into or out of your application. Additionally, you

can use this ESM with a 1756-L73S (8MB) or smaller memory-sized controller only.

1756-ESMNRM(XT)

Secure capacitor-based ESM (non-removable)
This ESM provides your application an enhanced degree of security by preventing physical
access to the USB connector and the SD card.

1756-SPESMNSE(XT)

Capacitor-based ESM without WallClockTime backup power for the safety partner
Use this ESM if your application requires that the installed ESM deplete its residual stored
energy to 40

μ

J or less before transporting it into or out of your application.

The 1756-L7SPXT extreme temperature safety partner ships with the 1756-SPESMNSEXT
installed.

1756-SPESMNRM(XT)

Secure capacitor-based ESM (non-removable) for the safety partner

OK

FORCE SD

RUN

Logix557x

RU

N REM PRO

G

Advertising