Rockwell Automation 1756-L7x GuardLogix 5570 Controllers - Manual (Page 16)

16 Rockwell Automation Publication 1756-UM022A-EN-P - November 2012
Chapter 1 System Overview
Selecting Communication
Networks The GuardLogix controller supports communication that lets it do the
following:
• Distribute and control Safety I/O on DeviceNet or EtherNet/IP networks
• Distribute and control remote Safety I/O on DeviceNet, EtherNet/IP, or
ControlNet networks
• Produce and consume safety tag data between 1756 and 1768 GuardLogix
controllers across EtherNet/IP or ControlNet networks or within the
same ControlLogix chassis
• Distribute and control standard I/O on EtherNet, ControlNet, or
DeviceNet networks
Use these communication modules to provide an interface between GuardLogix
controllers and network devices.
The GuardLogix controller can connect to the Logix Designer application via a
USB connection, an EtherNet module, or a ControlNet module.
See the Additional Resources on page 10 for more information on using network
communication modules.
Programming Requirements Use Table 7 to identify the programming tool and the versions for use with your
GuardLogix 5570 controllers.
Table 6 - Communication Modules
To interface between Use this module Refer to these installation
instructions
The GuardLogix controller and DeviceNet devices 1756-DNB DNET-IN001
The GuardLogix controller and EtherNet/IP devices
1756-ENBT
1756-EN2T
1756-EN2F
1756-EN2TR, 1756-EN3TR
1756-EN2TXT ENET-IN002
Controllers on the ControlNet network
1756-CN2, 1756-CN2R
1756-CN2RXT CNET-IN005
Table 7 - Software Versions
Cat. No. Studio 5000 Environment RSLogix 5000 Software
Version
(1)
(1) For information on using a GuardLogix controller with RSLogix 5000 software, refer to GuardLogix Controllers User Manual,
publication 1756-UM020 and GuardLogix Controller Systems Safety Reference Manual, publication 1756-RM093 .
RSLinx ® Classic
Software Version
1756-L71S, 1756-L72S,
1756-L73S, 1756-L73SXT 21.00.00 or later 20.00.00 or later 2.59 or later