Rockwell Automation 1756-L7x GuardLogix 5570 Controllers - Manual (Page 25)

Rockwell Automation Publication 1756-UM022A-EN-P - November 2012 25
Install the Controller Chapter 2
Remove the SD Card
If you want to remove the SD card, follow these steps.
1. Turn the keyswitch to the PROG position.
2. Open the door to access the SD card.
3. Press and release the SD card to eject it.
4. Remove the SD card and close the door.
IMPORTANT Verify that the SD card status indicator is off and that the card is not in use
before removing it.
Logix 55xx
RUN FORCESD OK
32015-M
Logix 55xx
RUN FORCESD OK
32004-M