Rockwell Automation 1770 DH,DHII,DH485 CABLE User Manual
Page 52
![background image](/manuals/579827/52/background.png)
Chapter 3
Constructing a Data Highway or
Data Highway Plus Cable System
3-20
c.
Insert the small end of the cone dielectric into the large end of the
cone. Press both parts together firmly until the rim of the cone
dielectric seats evenly against the large end of the cone.
Cone
Cone
Dielectric
18735
d.
Fold back the braided shield and unwrap the foil shield to expose the
filler cord and conductor wires.
Filler Cord
Foil Shield
Braided Shield
Conductor
Wires
18736
Important: In the next step, be sure you do not damage the foil shield or the
braided shield.
e.
Cut off the exposed portion of the filler cord. Replace the braided
shield over the cone.
f.
Slide the cone assembly over both conductor wires. Fit the tapered
end of the cone under the foil shield and braided shield so that the
cone assembly causes both shields to flare out.
Cone
Assembly
Foil Shield
Braided Shield
Conductor
Wires
18737