Rockwell Automation 1770 DH,DHII,DH485 CABLE - Manual (Page 53)

Constructing a Data Highway or
Data Highway Plus Cable System
Chapter 3
3-21
g. Push the cone assembly onto the conductor wires until the foil shield
and the braided shield are slightly crimped between the cone
assembly and the outer jacket.
Important: In the next step, do not cut the drain wire.
h. Using wire cutters, carefully cut the foil shield and the braided shield
until they are just short of covering the entire tapered portion of
the cone.
Conductor
Wires
Foil and
Braided Shields
Drain Wire
Cone
Assembly
10807A