Rockwell Automation 1770 DH,DHII,DH485 CABLE - Manual (Page 69)

Constructing a Data Highway or
Data Highway Plus Cable System
Chapter 3
3-37
2. Connect the mating ends of the two trunkline segments you disconnected
from the T-connector.
Reconnect Trunkline Segments here
Trunkline Segment
Trunkline
Segment
Dropline of
disconnected
Node
T - Connector
11620
Remove
3. If possible, remove the T-connector and dropline from the site and store
them for future use.
Permanently Remove an End Node on a Network Constructed with a
1770-XG Connector Kit
To permanently remove an end node (either the first or last node on the
trunkline) linked to the network by a 1770-XG connector kit, follow these steps.
1. Disconnect the trunkline segment from the T-connector that is connected
to the node you want to remove.