Hardware description, Hardware description -3 – Rockwell Automation 2727-G7P20D3Q7 MobileView G750 Guard Machine Terminal User Manual
Page 13
Publication 2727-UM002D-EN-P
Overview 1-3
Hardware Description
The following illustration shows the location of key hardware
components.
1
2
3
5
7
8
6
4
10
11
13
14
15
9
12
1
Potentiometer with 0-127 linear resolution (option)
2
Electronic handwheel with 50 pulses/rev, -32768 to +32768 (option)
3
Emergency stop switch, twin-circuit, N/C contacts, 24V dc, 500mA max
(option)
4
Membrane keypad with tactile feedback - standard Windows keyboard
operation
5
Illuminated momentary push button, normally open, OFF marking, yellow LED
(option)
6
3-position key switch (option)
7
Illuminated momentary push button, normally open, ON marking, yellow LED
(option)
8
7.7 inch VGA (640 x 480 pixels) passive matrix color LCD display with analog
resistive touch screen
9
3-position, twin circuit, enabling switch (one each side of handle) for safety
interface
10
IrDA keyboard/printer interface, 9600 or 115.2K baud
11
Handle for left or right-hand operation
12
Single slot PC card interface for Type I, II and III cards (option)
13
Strain relief for connection cable (shipped with cable)
14
Back cover to connection compartment
15
Plug for cable outlet when not used (meets degree protection IP54)