Setting auto start, Configuring ethernet network settings – Rockwell Automation 2727-G7P20D3Q7 MobileView G750 Guard Machine Terminal User Manual
Page 90
Publication 2727-UM002D-EN-P
6-2 CE Thin Client Operating Instructions
Setting Auto Start
To configure the Auto Start sequence, copy the Remote Desktop
Connection shortcut from the desktop to the Windows Startup folder
(storage card\windows\startup).
Configuring Ethernet
Network Settings
To configure the onboard Ethernet communications hardware
of your MobileView terminal:
1. Tap the Start button and select Settings>Control Panel.
2. Double-tap the Network and Dial-up Connections icon.
3. Double-tap the CELAN1 icon.
4. Tap the IP Address tab and select either Obtain an IP Address
via DHCP or Specify an IP Address, depending on your
network configuration.
If you select Specify an IP Address, complete the 3 text boxes
with information from your network administrator or ISP. Use
the on-screen input panel to enter the text. You can access the
input panel by tapping the Stylus icon on the task bar.