Handling of the mobileview terminal, Handling of the mobileview terminal -9, Risk assessment of machinery – Rockwell Automation 2727-G7P20D3Q7 MobileView G750 Guard Machine Terminal User Manual
Page 27
Publication 2727-UM002D-EN-P
Safety Precautions and Elements 2-9
Risk Assessment of Machinery
For the risk assessment, the following standards must be applied:
• EN 292-1 “General principles for design of machinery”
• EN 1050 “Principles for risk assessment of machinery”
• EN 954-1“Safety-related parts of control systems”
• ANSI/RIA 15.06-1999 “For Industrial Robots and Robot Systems -
Safety Requirements (Section 9)
• ANSI B11.TR3-2000 “Risk Assessment and Risk Reduction - A
guide to estimate, evaluate and reduce risks associated with
machine tools”
The safety categories (B, 1, 2, 3, 4) define the structure of
safety-related parts of a machine and are derived from this risk
assessment.
Page 2-6 shows how the MobileView terminal meets safety category 3
using a PILZ PST1 safety control relay with the enabling switches. The
entire control system must be designed according to the principles of
safety category 3.
Handling of the
MobileView Terminal
The MobileView terminal is a high-quality device that is equipped
with state-of-the-art electronics.
To avoid malfunctions or damage through improper handling, follow
these instructions during operation.