Making an ethernet connection, Using the pc card slot – Rockwell Automation 2727-G7P20D3Q7 MobileView G750 Guard Machine Terminal User Manual
Page 41
Publication 2727-UM002D-EN-P
Terminal Connections 3-13
Making an Ethernet
Connection
The MobileView terminal is equipped with a 10Base-T interface which
supports TCP/IP protocol at 10MBaud for half-duplex
communications.
The Ethernet connector at S3 on the Junction Box provides a
connection to an Ethernet network. The connector uses an 8-pin
modular jack connector. Pinouts are as follows:
Using the PC Card Slot
The PC card slot is a factory installed option and supports Type I, II,
and III PC cards. The following PC cards are available from
Allen-Bradley. The terminal does not support SRAM cards, CardBus
cards, or cards that use 12 volts for programming.
Pin #
Ethernet Signal
1
TD+
2
TD-
3
RD+
4
Not Used
5
Not Used
6
RD-
7
Not Used
8
Not Used
Catalog No.
Description
2711-NM28
8M flash ATA card for storing applications.
2711-NM216
16M flash ATA card for storing applications.
2711-NM232
32M flash ATA card for storing applications.