Rockwell Automation 2727-G7P20D3Q7 MobileView G750 Guard Machine Terminal - Manual (Page 37)

Publication 2727-UM002D-EN-P
Terminal Connections 3-9
Accessing/Wiring the
MobileView Connection
Compartment Removing the Back Cover
This section shows how to remove the back cover of the MobileView
terminal. Once the back cover is removed, you have access to the
area which contains all of the connectors.
1. Place the terminal on a stable, flat surface.
2. Remove the 6 screws that secure the back cover to the
MobileView terminal.
3. Carefully lift off the back cover and place it on a secure surface.
ATTENTION
!
Turn off the power supply before removing the back
cover of the MobileView terminal.
When the back cover is removed, the MobileView
terminal is sensitive to electrostatic discharge (ESD).
Back Cover