Chapter 4 - configuring the mobileview terminal, Chapter objectives, Using the mobileview configuration tool – Rockwell Automation 2727-G7P20D3Q7 MobileView G750 Guard Machine Terminal User Manual
Page 45: Chapter 4, Configuring the mobileview terminal, Chapter
1
Publication 2727-UM002D-EN-P
Chapter
4
Configuring the MobileView Terminal
Chapter Objectives
This chapter shows how to:
• configure settings of the MobileView hardware using the MV
Configuration Tool
• verify operating and control elements
• transfer data with a Personal Computer
• install programs
• save registry settings
Using the MobileView
Configuration Tool
Use the MobileView Configuration Tool to:
• calibrate and test operating elements
• adjust display
• calibrate the touch screen
• set start-up functions
To activate the tool from the Start menu, select:
Start>Programs>MobileView>MV Configuration Tool
The MobileView Config Tool dialog opens with the default
Potentiometer tab selected.
IMPORTANT
Settings not made with the MV Configuration Tool,
must be saved using the Registry Backup utility
found in Start>Programs>MobileView folder. See
page 4-15.