Rockwell Automation 2727-G7P20D3Q7 MobileView G750 Guard Machine Terminal - Manual (Page 58)

Publication 2727-UM002D-EN-P
4-14 Configuring the MobileView Terminal
Disconnecting Communication
To disconnect communication between the MobileView and PC:
1. If the connection status box is minimized on the MobileView,
double-tap the Connection icon at the bottom of the
MobileView terminal screen to open it.
2. Tap the Disconnect button. Communication disconnects and
the connection status box closes.
3. The ActiveSync window on the PC will show a status of “Not
Connected”. This may take some time before it is displayed.
Installing Programs You can install programs using the ActiveSync software on a PC
(covered in the previous section) or a PC card.
• For PC program transfers, use Windows Explorer on the PC.
The MobileView terminal will appear as a MobileView device
directory.
• For PC card transfers, insert the PC card in the PC card slot of
the MobileView terminal and use Windows Explorer on the
MobileView terminal. The PC card image will appear as “Storage
Card” directory under the root directory.
Disconnect button
IMPORTANT
The “Flash Storage” directory is the only directory
stored in flash. Programs and data installed in other
directories are lost when power is cycled to the
MobileView terminal. Save all data you want to
retain in the “Flash Storage” directory.
IMPORTANT
Many programs store their drivers in the Windows
directory, but this directory is not saved. These
programs will not function after you turn off the
MobileView terminal. Relocate drivers to the “Flash
Storage” directory.