Saving registry settings, Saving registry settings -3 – Rockwell Automation 2727-G7P20D3Q7 MobileView G750 Guard Machine Terminal User Manual
Page 91
Publication 2727-UM002D-EN-P
CE Thin Client Operating Instructions 6-3
5. Tap OK in the settings dialog. A notification window appears
prompting you to either remove and reinstall your card or restart
the device for the new settings to take effect. Tap the OK button
in notification window.
6. Tap OK on the Network Configuration dialog and close the
Control Panel.
Saving Registry Settings
To save the current registry settings:
1. Tap the Start button and select
Programs>MobileView>Registry Backup.
2. To save the registry, tap the OK button. Saving the registry may
take 15 seconds. The registry backup will automatically close.
IP Address must be a
unique address on the
LAN.
Subnet Mask must be
identical to the server
subnet mask.
Default Gateway is
optional.
ATTENTION
!
Any hardware configuration or Ethernet network
configuration changes must be saved using the
Registry Backup or they will be lost during a
MobileView terminal power cycle.